★ How do I clean my dolls?

Cleaning a sex doll after use is a simple process that can be completed in just a few minutes with the right tools. Here's a guide on how to keep your sex doll looking as good as new using the recommended tools:

For your health, it's essential to thoroughly clean the sex doll before each use. There are various methods for cleaning a sex doll, but we recommend using the Tantaly Sex Doll Care Kit or Love Holes Cleaning Douche for better cleaning and care. Tantaly Sex Doll Care Kit includes a portable sex doll cleaning machine, two drying sticks, a doll storage bag, and a lubricant applicator. The Cleaning Douche comes with 2 drying sticks.

1. Flushing the Doll's Vagina:
a. Using Tantaly Sex Doll Care Kit:
Install the portable sex doll cleaning machine: Gently twist and unscrew the nozzle from the enema ball, squeeze the ball to release air, then fully submerge the ball in warm water and release, screw the nozzle back onto the ball to complete the installation.

Insert the tip with the sprinkler hole fully into the doll's tunnel.

Squeeze the ball to let warm water spray into the doll's tunnel through the sprinkler hole.

b. Using Love Holes Cleaning Douche:
Prepare a 1.5-liter water container with room temperature water or not exceeding 104°F.

Attach the flushing head to the main unit and insert the hose into the bottom.

Please verify if the flushing head can rotate properly in both directions.

Wet the flushing head with water from the container, insert it into the doll's tunnel, then press the switch to complete flushing in 60 seconds. Electric Flushing Device Image.

* We recommend that if you are going to use the rotation feature, do not leave the rod still or it will catch on the internal ribs and damage the doll. It is best used in an in and out motion.

2. If mild soap or shower gel was used, rinse the doll's passage repeatedly until all foam is gone.

3. Shake or squeeze out most of the water from inside the doll.

4. Gently insert the drying stick into the tunnel to absorb the residual moisture. After that, you can squeeze the doll's abdomen and buttocks appropriately to facilitate the drying stick to absorb the moisture inside.

5. Remove the water-absorbing stick after leaving it for about 30-60 minutes. Do not leave the drying stick in the tunnel for a long time to avoid tearing the tunnel. If you find that there is still moisture in the tunnel after removing the drying stick, you can replace it with another drying stick and leave it for about 30 minutes. The water-absorbing stick can be reused. It is recommended to clean it after each use and place it in a ventilated place to dry.

6. To pat dry the doll's skin, gently pat the skin with a soft cloth while it's damp. Avoid excessive force.

7. After removing most of the water from the doll's body, let it stand for an hour to air dry naturally. Then, you can apply Tantaly skin rejuvenating powder to the doll's body (only on the exterior) to emit a pleasant fragrance and prevent skin stickiness. Avoid applying the powder when the doll is very wet.

8. Gently place the doll into the Tantaly polycarbonate box, zip up the black handbag to protect privacy and prevent dust.

For more information, please refer to our detailed cleaning and maintenance guide: Cleaning and Maintenance Guide for Sex Dolls