Why Does the dolls using Ultra Lightweight technology Require a Waterproof Plug?
The Ultra Lightweight technology aims to significantly reduce overall weight while maintaining realistic touch and reliable structural support.
Because of this advanced lightweight construction, proper water protection is especially important.
Silicone Waterproof Plug Correct Usage Guide
1. The primary functions of the waterproof plug during cleaning are to:
1) Effectively seal the internal ventilation channel
2) Prevent water from entering the internal structure during cleaning
3) Protect the internal frame and lightweight filling materials from water damage
2. Potential Risks If Water Enters the Interior
If moisture penetrates the interior, it may cause the following issues:
1) Increased Weight
2) Internal Moisture Risks
If the interior cannot fully dry over time, it may:
• Promote bacterial growth
• Cause unpleasant odors
• Negatively impact hygiene and overall user experience
3) Structural Damage & Reduced Lifespan
Water exposure may lead to irreversible damage to the internal frame, joint connections, and ventilation system, significantly shortening the product’s service life.
3. Important Usage Instructions for the Waterproof Plug
Before cleaning the silicone torso or the product’s exterior, ensure the waterproof plug is correctly installed.
Please strictly follow these guidelines:
1) For daily exterior cleaning and splash-resistant environments only
2) Always confirm the waterproof plug is fully and securely inserted before cleaning
3) Avoid directing running water at the same area for extended periods
4. The Following Actions Are Strictly Prohibited
Please be aware that the following actions are considered serious misuse:
1) Fully submerging the product in water while squeezing, pressing, or kneading it
2) Performing the above actions even if the waterproof plug is properly installed
Reason:
When the product is squeezed or compressed, internal pressure changes occur. Even with the waterproof plug in place, these pressure fluctuations can cause water to rapidly and extensively enter the internal structure.
Consequences of Improper Use (Please Take Seriously)
Engaging in the prohibited actions above may result in:
1) Irreversible internal water damage
2) Compromised structural safety
3) Significantly reduced product lifespan
Such damage does not fall under normal usage conditions and must be strictly avoided.
The waterproof plug is not designed for underwater washing but for internal protection during proper cleaning scenarios.
Correct use of the waterproof plug, combined with standardized cleaning practices, providing long-term safety, durability, and reliability.
Comments
0 comments
Please sign in to leave a comment.