How to clean a silicone doll? (Without cleaning tools)

After use, please clean all parts of the doll with warm water and mild bath gel or soap as soon as possible.

Soak a sponge or soft cloth in warm water and gently wipe the surface of the doll. Do not scrub vigorously.

Do not allow water to enter the neck bolt hole to prevent water intrusion and rust. (Dolls using ultra-lightweight technology need to have the waterproof plug installed correctly.)

 

 

1. With warm water (not exceeding 50°C) running from the faucet, add a small amount of mild gel or soapy water to the inside of the insert.

2. Hold the insert under the gently running water, allowing it to slowly fill.

3. As it fills, gently squeeze the outside of the insert to mix the soap and water inside.

4. Pour the soapy water out into the sink, then rinse the inside thoroughly by repeating the process until no soap remains.

Important: Any leftover soap can cause irritation during use, so rinse multiple times until fully clean.

5. If needed, repeat the entire process for additional cleaning

 

Notes:

1) Avoid using corrosive cleaning agents, such as strong acids, alkaline solutions, powerful disinfectants, or irritating detergents.

2) Use mild cleaning agents: mild soap, liquid shower gel, or mild cleaning products.

 

 

1. Pat the outside of the insert dry with a soft towel.

2. Gently insert the drying stick into the tunnel and leave it for 15-30 minutes. Then the doll's belly and hips can be squeezed appropriately to facilitate the stick absorbing the water inside. The stick is left in place for about 15-30 minutes, then take out it. Do not leave the drying stick in the channel for a long time, so as not to cause the channel to tear.

 

If you find that there is still moisture in the tunnel after taking out the stick, you can replace another stick and continue to place it for about 15-30 minutes. And then place the doll in a dry and ventilated place and let it dry completely. (It is recommended to dry the absorbent stick under the sun or in a well-ventilated area.)

 

Please remove the drying stick before storing to avoid channel tearing. And ensure that the doll's tunnel is completely dry that no moisture remains to prevent the growth of bacteria and mould.

 

Proper cleaning helps extend the life of your silicone doll and ensures safe, hygienic use.